With the TS500 Three Angle Tooling System for seat cutting your shop will have the latest cutting technology available in the industry.  The ball drive system was originally designed by Tim Whitley at T&S and remains the standard for today's seat and guide operations.  With the TS500 Three Angle Tooling you can use your existing seat grinding arbors and it is available for most seat and guide machines available on the market today.  The TS500 Three Angle Tooling uses dead pilots in varying sizes and Regis or Serdi carbide inserts.  This tooling is popular with General Automotive and Hi-Performance shops alike.

TS-105

Ball Socket Assembly for TS-3M and TS-4M

TS-105 Cat 30

Ball Socket Assembly for TS-2000 Seat and Guide Machine

TS-3M (Shown)

#3 Morse Taper Adapter

TS-4M

#4 Morse Taper Adapter

TS-SS

3/4" Straight Shank Adapter for Bridgeport Mill

Deluxe Ball Head

TS-106DSX

Ball Head for Sioux pilots (.375" id)

TS-106DKW

Ball Head for Kwik-Way pilots (7/16" id)

TS-106DNEW

Ball Head for Neway pilots (3/8" id)

TS-106DSUN

Ball Head for Sunnen Pilots (.3895" id)

TS-106AB

Brass Tipped Lock Screws for tool holders

TS-106B

Dowel Pins for Ball Head

TS-102

Small Tool Holder (.709" - 1.195")

TS-102A

Radial Adjusting Screw for TS-102

TS-103

Medium Tool Holder (1.0195" - 1.600")

TS-103A

Radial Adjusting Screw for TS-103

TS-104

Large Tool Holder (1.550" - 2.450")

TS-104A

Radial Adjusting Screw for TS-104

Tool Setting Fixture

This item is used to set the radius of the cutting insert and toolholder on

the ball head.  Simply move the pointer to a location on the valve face and

tighten the locking knob.  Insert a Pilot and TS-106 Ball Head and adjust

the tool holder to match the point on the valve.  Setup is very fast and easy.